|
|
Rubicon
Express Swaybar Quick Disconnects
I
bought these Rubicon Express Swaybar Quick Disconnects from Jeff over
at AllMyNeeds.com and they have been by far one of the fastest and
easiest mods I've done yet. Before you order a set for yourself, be
sure you know the length you will need as these come with center tubs
ranging from 4" - 10" long. I did not know this and when
my order showed up, the tubs were too short. Fortunatly for me, Jeff
is way cool and got new 8" tubes sent to me right away!
What
You Will Need
• Rubicon Express
Swaybar Quick Disconnects
with the correct length center tubes
Installation
1. As mentioned, Installing
these is really a piece of cake. Parked on level ground, unbolt your
sway bar links from the U-bolt plates and unscrew the nuts on the
swaybar.
2. The bolts holding the swaybar links to the swaybar
are tappered and will require a pickle fork or a couple of good whacks
from a hammer to get them out.
3. Re-assemble everything with the new disconnects
and you're done.
Post Installation Notes:
in case anyone is wondering, these disconnects
are anything but quick and I would highly recommend going with another
brand. Simply put, they are way too difficult to use especially compaired
to my TJ's JKS discos.
That should be it. Please let me know if you have any questions.
|
|
|
